Toro 68013, Руководство оператора

Страница: 9 / 48

2
Installing the Tow Pole
Parts needed for this procedure:
1 Tow pole kit (sold separately)
Installing the Tow Pole to the Machine
Note:
The tow pole is purchased separately and includes the
nut and bolt needed for installation.
The machine has the following tow pole options:
Hitch Type Length
50 mm (2 inch) ball—stamped 78.7 cm (31 inches) or 127 cm
(50 inches)
50 mm (2 inch) ball—forged 78.7 cm (31 inches) or 127 cm
(50 inches)
Pintle 78.7 cm (31 inches) or 127 cm
(50 inches)
1. Remove the bolt and nut from the tow pole (Figure 6).
5
1 2
4
6
3
G019804
Figure 6
1. Tow pole 4. Bolt hole
2. Front post 5. Frame fitting
3. Bolt 6. Nut
2. Slide the tow pole forward and align the hole in the
pole with the hole in the frame fitting (Figure 6).
3. Insert the bolt through the holes in the fitting and the
pole (Figure 6).
4. Thread the nut onto the bolt and tighten them until
they are tight against the frame fitting (Figure 6).
Note:
If the self-locking nylon insert in the locknut
wears with use, replace the nut with a new Grade 5 or
Grade 8 locknut.
3
Installing the Safety Chain
Parts needed for this procedure:
1 Safety chain
2
Connecting link
Installing the Safety Chain to the
Machine
1. Form a hook on the end of a bendable piece of rod
or stiff wire (not included), and insert it through both
keyholes in the front post of the machine (Figure 7).
A B
C D
g019883
2
3
4
3
1
Figure 7
1. Keyhole 3. Safety chain
2. Rod or wire (not included) 4. Connecting link
2. Attach the safety chain to the length of rod or wire
(Figure 7).
3. Pull the rod, or wire, and the safety chain through both
keyholes (Figure 7).
Note:
Ensure that approximately equal lengths of
safety chain extend from either side of the front post.
Installing the Connecting Links
1. Align the connecting link to the last link in one end of
the safety chain (Figure 7).
2. Insert the connecting link through the chain link until
the connecting link snaps closed (Figure 7).
3. Repeat steps 1 and 2 to install the other connecting link
in the other end of the safety chain.
9