Toro 68013, Руководство оператора

Страница: 31 / 48

Note:
Use SAE 10W-30 for general use. You can use
the other viscosities shown in the chart when the average
temperature in your area is within the indicated range (Figure
51).
g013375
0 20 40 60 80 100 F
-20 -10 0 10 20 30 40 C
o
o
30
5W - 30 / 10W - 30
Figure 51
Draining the Engine Oil
WARNING
Oil may be hot after the engine has been run, and
contact with hot oil can cause severe personal injury.
Avoid contacting the hot engine oil when you drain
it.
1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the wire from the spark plug; refer to
Disconnecting the Spark-plug Wire (page 28).
3. Place a drain pan under the oil drain hole of the engine
(Figure 52).
1
2 3
G019750
Figure 52
1. Oil drain plug 3. Oil drain pan
2. Oil drain hole
4. Remove the drain plug and catch the oil in the oil drain
pan (Figure 52).
5. When the oil has drained completely, install the drain
plug with a new washer (Figure 52).
Note:
Dispose of the used oil at a certified recycling
center.
Filling the Engine Crankcase with Oil
1. Remove the dipstick (Figure 53) and slowly pour oil
into the fill hole until the oil reaches the upper-limit
mark (bottom edge of the oil-fill hole) on the dipstick.
31