Toro 68013, Руководство оператора

Страница: 8 / 48

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
Dump handle 1
Bolt 2
1
Nut 2
Install the dump handle.
2
Tow pole kit (sold separately) 1 Install the tow pole.
Safety chain 1
3
Connecting link 2
Install the safety chain.
1
Installing the Dump Handle
Parts needed for this procedure:
1 Dump handle
2 Bolt
2 Nut
Installing the Dump Handle to the Drum
1. Cut the cable ties to remove the dump handle from
the underside of the grate.
2. Position the dump handle so that the bolt holes align
with the bolt holes in the drum (Figure 3, Figure 4,
or Figure 5).
G022169
Figure 3
Models 68013, 68016, 68020
G022150
Figure 4
Models 68014, 68017, 68021
G022149
Figure 5
Model 68024
3. Insert the 2 bolts through the bolt holes in the dump
handle and the drum (Figure 3, Figure 4, or Figure 5).
4. Install a nut onto each bolt, and tighten them by hand
to prevent cross-threading.
5. Tighten the nuts with a wrench while using another
wrench to keep the bolts from spinning.
8