Toro 09960, Руководство оператора, Страница: 31 / 92

g356450
Figure 42
1. Tine arm 3. Bolt (1/2 x 1-1/4 inches)
2. Tine holder
2. Torque the bolts (1/2 x 1-1/4 inches) to 102 N∙m
(75 ft-lb).
3. Repeat steps 1 and 2 for tine arm #5.
4. Check the alignment of the turf guard slots to the
tines to ensure that they are centered (
Figure
43 ).
Note:
Adjust the turf guards as required.
g357677
Figure 43
Gaps in the turf guards
5. Torque the flange locknuts (3/8 inch) that secure
the 3 turf-guard clamps and 3 turf guards to the
3 turf guard brackets.
6. Install the remaining tine holder and tines to tine
holders #1, #3, #4, and #6 with 12 bolts (1/2 x
1-1/4 inches).
7. Torque the bolts (1/2 x 1-1/4 inches) to 102 N∙m
(75 ft-lb).
8. Calibrate the machine for tine to ground height;
refer to
Running the Teach Ground Height
Application (page 36) .
Hole Depth, Hole Spacing,
and Tine Settings
Accessing the Settings Screens
1. Rotate the ignition key to the R
UN
position.
Note:
The T
RANSPORT
mode screen or the
A
ERATE
mode screen displays ( Figure 44 ).
g358601
Figure 44
2. Press the right InfoCenter button twice to display
the Calibrating the Tine Ground Height screen
(
Figure 45 ).
Note:
Press the left InfoCenter button to display
the T
RANSPORT
mode screen.
g357983
Figure 45
3. Press the right InfoCenter button to display the
Setting the Hole Depth screen (
Figure 46 ).
Note:
Press the left InfoCenter button to display
the Teach Ground Height screen.
31