Toro 09960, Руководство оператора, Страница: 30 / 92

Note:
Do not tighten the flange locknuts.
g357675
Figure 38
1. Washer (7/16 x 13/16 inch) 4. Turf guard
2. Flange locknut (3/8 inch) 5. Stud (turf-guard bracket)
3. Turf guard clamp
Assembling the Tine Holder
1. Loosely assemble the tine clamp to the tine
holder (
Figure 39 ) with 4 bolts (3/8 x 1-1/2
inches). Do not tighten the bolts.
Note:
The bolts are parts in the tine holder kits.
g356449
Figure 39
1. Tine holder 3. Bolt (3/8 x 1-1/2 inches)
2. Tine clamp
2. Assemble the tines into the tine holder and tine
clamp (
Figure 40 ).
g356451
Figure 40
1. Tine 2. Bolt (3/8 x 1-1/2 inches)
3. Torque the bolts (3/8 x 1-1/2 inches) securing
the tine clamps and tines to 40.6 N∙m (30 ft-lb).
4. Repeat steps 1 through 3 for the other tine
clamps, tine holders, and tines.
Assembling the Tines to the
Coring Head
1. Loosely assemble tine holder and tines to tine
arm #2 (
Figure 41 and Figure 42 ) with 3 bolts
(1/2 x 1-1/4 inches).
g357676
Figure 41
1. Number 5 tine holder 2. Number 2 tine holder
30