Toro 07390 Workman HDX-Auto, Руководство по обслуживанию, Страница: 107 / 280

Workman HDX Auto Page 5 − 5 Chassis
Troubleshooting
Suspension and Steering
Problem Possible Causes
Excessive front end noise. Loose or worn front wheel bearings.
Worn front shock absorbers.
Worn stabilizer link bushings.
Loose steering components (e.g. tie rods, steering
cylinder).
Worn control arm bushings.
Tire pressure low (4WD vehicles).
Worn tires (4WD vehicles).
Excessive rear end noise. Worn or brinelled rear wheel bearings.
Worn rear shock absorbers.
Worn leaf spring bushings.
Rear differential or CV axle problem (see Chapter 4 −
Drive Train).
Excessive steering play. Loose or worn front wheel bearings.
Loose or worn steering linkage.
Worn tie rod ends.
Front wheel shimmy. Loose or worn front wheel bearings.
Tires out of round or uneven tire wear.
Worn tie rod ends.
Incorrect front wheel alignment (toe−in).
Worn shock absorbers.
Instability (wander). Low or uneven tire pressure.
Worn or loose wheel bearings.
Worn steering linkage bushings.
Broken or loose rear leaf spring.
Worn shock absorber(s).
Incorrect front wheel alignment (toe−in).
Worn or loose ball joints.
Chassis