Toro 07344, Руководство оператора

Страница: 10 / 24

Figure 7
1. Hitch plate
3. Switch harness
2. Level switch bracket
2. Route switch harness forward, along shift cable to
left side of machine. Harness must not interfere with
any hot (exhaust) or moving parts. Secure harness to
shift cable with cable ties.
6
Mount Lift onto Vehicle Frame
Parts needed for this procedure:
2 Reinforcing Plate
2 Spacer tube
2 Flange HD. Capscrew, 3/8-16 x 3 inch
2 Flange HD. Capscrew, 3/8-16 x 3–1/2 inch
4
Flange HD. Capscrew, 3/8-16 x 1 inch
4 Flangenut, 3/8-16
For Workman 3000–4000 series
vehicles with serial numbers 240000001
and up
Note:
To install the platform lift in the mid position,
the Mid Mount Kit for the Platform Lift, Part No.
93–3741 must be purchased and installed.
1. Remove any accessories mounted to top of frame in
forward position such as a 1/3 bed, power platform,
H.D. Hitch Frame extension tubes (Figure 8), etc.
Figure 8
1. Hitch frame extension tube
2. Locate and remove the threaded insert from the
mounting hole in left and right vehicle frame
channels, as shown in Figure 9.
Figure 9
1. Vehicle frame channel 2. Threaded insert
Note:
To prevent lift scissor arms from expanding,
pick up the platform lift from the bottom when
positioning on frame.
3. Position lift onto frame aligning mounting holes with
holes in frame (Figure 10).
10