Toro 07344, Руководство оператора

Страница: 6 / 24

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Remove the seat, shroud and fender
assemblies
2
No parts required
–
Remove the hood
Main Wire Harness w/ Relays 1
Cable Tie 7
Screw, 1/4 x 3/4 inch 2
Nut, 1/4 inch 2
3
Fuse 1
Install main wire harness w/relays
Parking brake switch 1
4
Screws 2
Mount the Parking Brake Switch
Rear level switch bracket 1
5
Rear level switch w/ harness 1
Mount rear level switch
Reinforcing Plate 2
Spacer tube 2
Flange HD. Capscrew, 3/8-16 x 3 inch
2
Flange HD. Capscrew, 3/8-16 x 3–1/2
inch
2
Flange HD. Capscrew, 3/8-16 x 1 inch 4
6
Flangenut, 3/8-16 4
Mount lift onto vehicle frame
7
No parts required
–
Connect wires
8
No parts required
–
Reinstall hood and reconnect battery
9
Circular Bubble Level 1 Mount circular bubble level
Operation Decal 1
10
No Step Decal 2
Install decals
The 1/3 platform lift is designed to be used only with a
Workman Vehicle and must be mounted with the wiring
harness, level, decals, switches and all interlock switches
installed. The 1/3 platform lift will only work on
Workman 3000–4000 series vehicles with serial numbers
240000001 and up and all Workman HD, HDX and
HDX-D vehicles.
6