Toro 04650, Руководство по установке, Страница: 8 / 16

g032560
Figure 15
1. Left bracket 3. Nut
2. Bearing cover 4. Bolt
2. Insert the end of the brush shaft without the
splines into the shaft collar in the bracket
assembly (non-drive side) as shown in
Figure
16 .
g032462
Figure 16
1. Bracket assembly (non-drive side)
3. Install the small retaining ring and a flocked seal
onto the splined end of the brush shaft (
Figure
17 ).
g032463
Figure 17
1. Small retaining ring 2. Flocked seal
4. Insert the splined end of the brush shaft through
the bearing in the drive-side bracket as shown
in
Figure 17 .
8