Toro 04054 Greensmaster 800 Скачать руководство пользователя | Manualshive

Страница: 42 / 44

background image

European Privacy Notice

The Information Toro Collects
Toro Warranty Company (Toro) respects your privacy. In order to process your warranty claim and contact you in the event of a product recall, we ask you
to share certain personal information with us, either directly or through your local Toro company or dealer.

The Toro warranty system is hosted on servers located within the United States where privacy law may not provide the same protection as applies
in your country.

BY SHARING YOUR PERSONAL INFORMATION WITH US, YOU ARE CONSENTING TO THE PROCESSING OF YOUR PERSONAL INFORMATION
AS DESCRIBED IN THIS PRIVACY NOTICE.

The Way Toro Uses Information
Toro may use your personal information to process warranty claims, to contact you in the event of a product recall and for any other purpose which we tell
you about. Toro may share your information with Toro's affiliates, dealers or other business partners in connection with any of these activities. We will not
sell your personal information to any other company. We reserve the right to disclose personal information in order to comply with applicable laws and
with requests by the appropriate authorities, to operate our systems properly or for our own protection or that of other users.

Retention of your Personal Information
We will keep your personal information as long as we need it for the purposes for which it was originally collected or for other legitimate purposes
(such as regulatory compliance), or as required by applicable law.

Toro's Commitment to Security of Your Personal Information
We take reasonable precautions in order to protect the security of your personal information. We also take steps to maintain the accuracy and current
status of personal information.

Access and Correction of your Personal Information
If you would like to review or correct your personal information, please contact us by email at [email protected].

Australian Consumer Law

Australian customers will find details relating to the Australian Consumer Law either inside the box or at your local Toro Dealer.

374-0282 Rev C

«
...
40
41
42
43
44
»

Содержание 04054 Greensmaster 800













































Отзывы:

Нет отзывов

Похожие инструкции для 04054 Greensmaster 800

Бренд: Kärcher Страницы: 32

Бренд: EarthWise Страницы: 9

Бренд: Poulan Pro Страницы: 8

911394 - Pro 21SCH

Бренд: Gravely Страницы: 23

PATRIOT FDR1648

Бренд: Land Pride Страницы: 36

Бренд: Toro Страницы: 24

Бренд: Gardenline Страницы: 24

Бренд: Ariens Страницы: 29

Бренд: Feider Machines Страницы: 22

Бренд: Gardeo Страницы: 60

Бренд: Ferris Страницы: 24

Бренд: Gardol Страницы: 324

Бренд: Lastec Страницы: 21

Бренд: Parkside Страницы: 60

Бренд: Mountfield Страницы: 20

Бренд: Mountfield Страницы: 14

Бренд: Craftsman Страницы: 56

Бренд: Craftsman Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды