g017948
Figure 7
1.
Bolt
3.
Washer
2.
Spring stud
4.
Flange–head nut
2.
Hook the spring into the hole in the spring
bracket and onto the spring stud while aligning
the kickstand with the mounting holes in the rear
frame (
).
g007594
Figure 8
1.
Kickstand
3.
Spring stud
2.
Spring bracket
4.
Spring
3.
Mount the kickstand to each side of the frame
with a bolt, lock washer, spacer, flat washer, and
locknut (
).
4.
Position the spacer in the kickstand mounting
hole.
3
Installing the Transport
Wheel Shafts
Models 04055 and 04056 Only
Parts needed for this procedure:
1
Right wheel shaft
1
Left wheel shaft
Procedure
1.
Push the kickstand down with your foot and pull
up on the handle to support the machine on the
kickstand.
2.
Apply thread-locking adhesive to the threads of
the wheel shafts.
3.
Thread the right wheel shaft into the drive pulley
on the right side of the machine (
).
Note:
The right wheel shaft has left-hand
threads.
g007595
Figure 9
1.
Right wheel shaft
4.
Torque the shaft to 88 to 101 N∙m (65 to 75 ft-lb).
5.
Repeat steps
through
to install the left wheel
shaft to the left side of the machine.
10
