Toro 03820, Руководство оператора

Страница: 17 / 56

g020158
Figure 19
1. Cutting-unit kickstand
Secure the kickstand to the chain bracket with the
snapper pin (
Figure 20 ).
g004144
Figure 20
1. Chain bracket 3. Cutting-unit kickstand
2. Snapper pin
Product Overview
Controls
g020079
Figure 21
1. Forward traction pedal 3. Mow/transport slide
2. Reverse traction pedal 4. Tilt-steering lever
Traction Pedals
Press the forward traction pedal ( Figure 21 ) to move
forward. Press the reverse traction pedal ( Figure
21 ) to move backward or to assist in stopping when
moving forward. Also, allow the pedal to move or
move it to the
NEUTRAL
position to stop the machine.
Mow/Transport Slide
Using your heel, move the mow/transport slide ( Figure
21 ) to the left to transport and to the right to mow. The
cutting units only operate in the mow position and
not lower in the transport position.
Important:
The mow speed is set at the factory
to 9.7 km/h (6 mph). You can increase or decrease
the mow speed by adjusting the speed stop screw
(
Figure 22 ).
g008888
Figure 22
1. Speed stop screw
17