Tornadoo 99414, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 15

8
BEFORE USE
Handling of the packed machine
The machine is supplied with
suitable packing.
The total weight is 165lbs.
Packing dimensions:
Base:
30 in x 16 in
Height:
24.5 in
ATTENTION:
Do not place more than two
machine packages on top of each
other.
Unpacking the machine
1. Open the packing as shown in
the figure.
2. Carefully take the machine off
the packaging.
3. Keep packaging for future
transport needs.
Movement of the handle bar
The handle bar in the package
arrives in the closed position.
To rotate the handle bar in one of
the different working positions to
move the machine:
1. Pull up the release lever (8) near
the handle bar.
2. Rotate the handle bar into the
working position while holding the
release lever (8).
3. Release the release lever (8) to
lock the handle bar.
Use the same procedure for further
height adjustment of the handle bar
to find the most comfortable
working position.
Battery
This machine is supplied with two
batteries already connected in
series, placed in its appropriate
compartment under the recovery
tank.
In case the batteries need to be
disassembled and/or replaced,
please contact the authorized
technical assistance.
In fact, the replacement must be
made exclusively with batteries
which have the identical
performances as the ones already
installed.
To reach the battery compartment
it is necessary to:
1. Remove the squeegee hose from
its seat (17).
2. Remove the suction filter cover
(19) after turning the blocking
levers (18).
3. Lift and remove the recovery
tank (16) holding it from the
provided handles. One on the front
and one on the rear of the tank.
ATTENTION:
Strictly follow
manufacturer/distributor
indications for the maintenance
and daily recharge of the batteries.
Specialized staff, using suitable
protection accessories must
execute all installation and
maintenance operations.
Battery recharging
(Standard version with AGM
batteries)
The charge level of the battery is
visible by first activating the main
switch (1) placed on the instrument
board, through three luminous
LEDs placed on the frame in the
rear part of the machine.
A: green LED on = batteries are
charged.
B: orange LED on = level at half
charge.
C: red LED on = complete
discharge of the batteries with
consequent automatic switching
off of all the machine's function.
To prevent permanent damage to
the batteries, it is essential to
completely discharge every 6 or 7