13
To replacement it is necessary to:
1. Rotate the squeegee lift lever (5)
to lower the squeegee assenbly.
2. Tip the machine backwards (see
under “POSITIONING OF THE
MACHINE FOR
MAINTENANCE AND
PARKING") remember to switch
off the main switch and to empty
the tanks before tipping the
machine.
3. With the machine in this
position remove the wing nuts (1)
4. Remove the squeegee hose (2)
and the squeegee assembly.
5. Release the catch (4) of
squeegee blade holder and take the
blade off to turn it to a new side or
replace it.
6. Check that the coupling and the
squeegee hose are not obstructed
and clean the entire assembly.
To reassemble the squeegee,
reverse the operations above.
Front squeegee replacement
Check the wear of the front
squeegee and replace it when
necessary.
For replacement it is necessary to:
1. Rotate the squeegee lift lever (5)
to lower the squeegee assembly.
2. Tip the machine backwards (see
under “POSITIONING THE
MACHINE FOR
MAINTENANCE AND
PARKING") remember to switch
off the main switch and to empty
the tank before tipping over the
machine.
3. With the machine in this
position proceed to disassemble
the squeegee and the rear squeegee
blade (see under “REAR
SQUEEGEE BLADE
REPLACEMENT”).
4. Take off the wing nuts (6) in the
upper part of the squeegee body,
separate the two metal parts that
form the squeegee body to take off
the front blade.
5. Clean and rinse all of the
components.
To reassemble the squeegee,
reverse the operations above.
TROUBLESHOOTING GUIDE
The vacuum motor does not work
1. Check the charge level of the
batteries that is visible by first
activating the main switch (1) (see
under “BATTERY
RECHARGING”).
2. Verify that the vacuum motor
switch (3) is on.
3. Check the level in the recovery
tank (see under “OVERFLOW
DEVICE”) and if necessary, empty
the tank.
If the problem persists, please
contact the authorized technical
assistance.
Содержание 99414
Страница 3: ...3 ...
