TOPSCCC EX-96085, Руководство пользователя

Страница: 71 / 98

EX-96085 User Manual 71
.
RESET CONFIGURATION DATA:
Normally, you leave this field Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup if you have installed a new
add-on and the system configuration has caused such a serious conflict that the operating system
cannot boot.
RESOURCE CONTROLLED BY:
The Award Plug and Play Bios can automatically configure all of the
booth and Plug and Play-compatible devices. However, this capability means absolutely nothing
unless you are using a Plug and Play operating system such as Windows 95. By choosing
“manual”, you are allowed to configure the
IRQ Resources and DMA Resources
.
IRQ RESOURCES:
The options for these items are found in its sub menu. By pressing the <ENTER>
key, you are prompt to enter the sub menu of the detailed options as shown below:
Phoenix – Award CMOS Setup Utility
IRQ Resources
Item Help
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
Menu Level ►
Legacy ISA for devices compliant
with the original PC AT bus
specification, PCI/ISA PnP for
devices compliant with the Plug
and Play standard whether
designed for PCI or ISA bus
architecture
↑↓→←
:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:General Help F5: Previous Values F6:Fail-Safe Defaults
F7:Optimized Defaults
Descriptions on each item above are as follows:
IRQ-n Assigned to:
You may assign each system interrupt a type, depending on the type of device
using the interrupt.