background image

NEW5310

www.newpostech.com

Unattended Terminal

NEW5310

PRODUCT

 

MANUAL

NEW POS TECHNOLOGY

NEW POS TECHNOLOGY  LIMITED

NEW POS Technology limited

Contents Checklist

The following items should be found inside the box:

Precautions

—

 Do not use the non-dedicated power supply, because it may be in trouble due to 

the mismatch of power.

—

 Do not vibrate, shake or knock the product sharply.

—

 When a fault occurs, immediately turn off the power supply and discontinue to 

use the product, please contact the service sector related to our company.

—

 Do not open and repair it by yourself.

—

 When the terminal being attacked by unscrupulous environment(such as opening 

the terminal shell, etc.), the internal sensitive information stored in the terminal 
will  be  erased.  For  avoiding  unnecessary  trouble,  you  should  not  open  the 
housing.

—

  NEW5310  is  designed  to  be  unattended  terminals,  it  is  used  outdoors,  Please 

follow as below:

1. The device should be covered by a pin shield over the pin entry area.
2. Avoiding the direct sunlight and the rain.
3. Place the device in a ventilated locality and keep good a heat dissipation 
    condition.

1. POS terminal               
2. Product Manual
3. Microfit power cable

1PCS
1PCS
1PCS

1. Warranty valid for 12 months after purchasing date.
2. This warranty will be voided if the product is damaged due to natural disaster, 
     fire, unauthorized alteration or improper usage.
3. Free Warranty covers original parts only
4. Warranty service will not be provided if no the dealer's stamp or this card is 
    missing.

Note:

This equipment complies with FCC RF radiation exposure limits set forth for 

an uncontrolled environment.

Содержание NEW5310

Страница 1: ...mation stored in the terminal will be erased For avoiding unnecessary trouble you should not open the housing NEW5310 is designed to be unattended terminals it is used outdoors Please follow as below 1 The device should be covered by a pin shield over the pin entry area 2 Avoiding the direct sunlight and the rain 3 Place the device in a ventilated locality and keep good a heat dissipation conditio...

Страница 2: ...W5310 NEW5310 Figure NEW POS Technology limited NEW POS Technology limited Magnetic stripe card User smart card slot LCD NFC leds Antenna inductive zone 1 Camera 4 Menu for setup Reset SIM SAM card cover Tag label Infrared LED Infrared sensor Waterproof ring Port cover ...

Страница 3: ...ot paste any label on the SIM SAM card to influence your card thickness or it may result in loading or removing the card can not be carried out smoothly 2 Power on off the device Power on Plug the Mircrofit jack or the MDB jack into the socket the device can turn on the power automatically Power off Pull the Mircrofit jack and the MDB jack away from the socket the device can turn off the power Res...

Страница 4: ...terference 2 This device must accept any interference received including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generate...

Отзывы: