Topper 20-209-001, Инструкция по установке и эксплуатации, Страница: 28 / 48

28
When More Water is Needed / Desired
Steps to determine storage needs: See Section 2, Page 17
Adding extra storage tanks:
a. Open the RO faucet and drain off at least a couple cups of water to release pressure on the in-
ternal bladder.
b. Wait until you hear the pressure release from the drain line.
c. Turn off the Feed Valve.
d. Remove the ¼ ” plugs from the SQ (Squeeze) and PW (Tank, Product Water) ports by pushing in
the white collet to release.
e. Connect ¼ ” yellow tubing between the matching SQ ports on the WOW RO System manifold
and the spare tank adapter connected to the spare tank (See Figure 9 below for one or multi-
ple tank set
- ups).
f. Connect ¼ ” green tubing between the matching PW ports on the manifold and the adapter
(See Figure 9 below for one or multiple tank set - ups).
g. After connections are completed, turn on the Primary Shut - Off Valve and open the faucet. You
will hear a combination of air and water eliminated from system. Leave it open until a solid
stream of water dispenses.
h. Close the faucet.
i. In less than a minute, the CPU Valve will activate and the system will resume making water
with a noticeable exhaust of air and water down the drain.
j.
To expel all of the air from the newly added tank, it may be necessary to draw water from
the faucet several times.
MANIFOLD
SPARE TANK
MANIFOLD
SPARE TANKS
Figure 9: Multiple Tanks