Topper 20-209-001, Инструкция по установке и эксплуатации, Страница: 20 / 48

20
The WOW RO System is uniquely designed to connect to one or more appliances (Figure 5), includ-
ing refrigerator icemakers and door dispensers, coolers (both gravity fed and pressurized), under -
the - counter hot & cold vented systems, commercial steamers (restaurants), commercial and coffee
makers, and other appliances that benefit from RO water. This section addresses “ Do ’ s and Don ’ ts ”
of connecting to one or more appliances. It also addresses how to determine storage and expan-
sion needs depending on how many appliances are hooked up.
General MUST Do ’ s for connecting ANY additional appliances:
A. It ’ s a must that the filter and water lines to any and all add-
ed outlets be clear of air. Note: System will not work with
air in the lines.
B. Close the isolation valves to all additional outlets.
C. Charge the system to its full status (refer to Start - up,
Page 15).
D. Follow the instructions provided from Pages 16 - 23.
Determining Your Expansion and Storage Needs:
A standard WOW RO System holds 1½ gallons. The WOW RO System has been designed in a mod -
ular format to add additional storage tanks as needed.
Review the chart below for each device connected. Add all additional tanks needed from right
hand column to determine the complete storage needs.
* Check device manual for actual reservoir capacity.
Connecting to Multiple Appliances
Device Average Reservoir in
Gallons *
Estimated Additional Tanks
Needed
Refrigerator / Icemaker 0 gallons None
Commercial Coffee Maker 1 gallon 0 - 1
Depending on draw down
needs at peak periods (See
Page 16 for draw down defini-
tion). Count glass/cups per
hour to determine if greater
than 1 gallon.
Gravity Cooler Up to 3 gallons 1
Pressurized Cooler Up to 3 gallons 1
Vented Hot Box 2/3 of a gallon or 84 oz. 0