Topper 20-209-001, Инструкция по установке и эксплуатации, Страница: 13 / 48

13
Install Filtration & RO Membrane Cartridges
1.
Remove the red cap from top of the filter & RO membrane cartridges.
2. With a black permanent marker, write the date on each filter to track replacement time. Pre
and post filters last up to a year. RO cartridge may last longer (see Page 33).
3. Pre - fill all the cartridges with bottled water or tap water until they overflow from the top. Wait
3 minutes and top off as cartridges soak up water. Repeat until all cartridges are completely
saturated and no air is present at the top.
4. Attach post - filter in the labeled POST position, RO membrane in the labeled RO position and
the pre - filter in the labeled PRE position, with a twisting counter clockwise upward motion until
you feel and hear stop tabs touch and colored dots are aligned (see Figure 3).
Installation Steps and Start - Up Procedures
Step 3
Figure 3a:
Warning: Check to see if the cartridges are fully engaged. Visually confirm colored dots are lined up and
white cartridge stop tabs are flush with black manifold stop tabs prior and after pressurization of system.
Figure 3b:
Figure 3c:
POST
RO
PRE
POST
RO
PRE