TOPEX MobiLink
IP
Preliminary Manual
The update (firmware image) must be on the PC. The image files are binaries that have the extension
“trx”.
One may download the image files from the TOPEX website. The update files are called “topex-
equipment-1.2.3- x.y.z-P.trx”, where “equipment” is the name of the device, such as <<mobilink-ip>>,
in the case of MobiLink IP, and 1.2.3. is the version number, for instance 0.0.4 or 1.0.1. The next
three letters indicate the hardware model, such as M1P or M2P:
These are very important, because you must allways load a firmware image which corresponds to the
type of your equipment – when you have a “M2P” box, you must update with an image type M2P, and
not M1P or M2J!
The three letters at the end, such as SAX or SCX define the software version.
Enter the name of the update or click Browse to search for it on the system. In the example below, the
image files are located in the folder “Updates” on the system partition of the hard disk drive, C:
Select the sub-folder for MobiLink IP, choose thefile needed and click Open.
TOPEX S.A. +4 021.408.39.00
Page 64 of 80
