Topens A3132, Руководство пользователя

Страница: 15 / 35

12
the opener and brackets assy. by
taking off the C-clamps.
7. Drill 10.5 mm diameter holes
through the post and the gate at the
marked locations.
8. Attach the post bracket assemblies
to the gate post by inserting M10 x
200 bolts through each post bracket
assy. and the drilled holes in the gate
post. Fasten each bolt with one
￠
10
washer, one
￠
10 lock washer, and
one
￠
10 nut.
9. Attach the gate brackets to each gate by inserting two M10 x 75 bolts through the gate brackets and the
drilled holes in the gates. Fasten each bolt with one
￠
10 lock washer, and one
￠
10 nut.
10. Cut off any part of the bolts that extend beyond the tightened nuts.
11. With the opener fully retracted and with the gate in the fully open position (for Pull-to-Open installation),
insert a clevis pin through the gate opener and the Post Pivot Bracket and insert another clevis pin through the
gate opener and the Gate Bracket. Secure each clevis pin with a hairpin clip.