14
1.
Insert the bolts through the holes of post bracket and
PSO part (push to open bracket)
as shown. Place
washers and nuts on the bottom of the bolts and hand tighten.
2.
Attach the gate bracket and post bracket assy. to the opener by inserting a clevis pin. Secure the clevis pins
using the hairpin clips.
3.
Open the release hole plug on the top of the gate opener, insert the
release key, and turn the key 90° clockwise. This releases the motor and
allows the push-pull rod to be manually extended and retracted. To restore
normal operation, turn the key 90° counterclockwise.
4.
With the opener fully retracted and with the gate in the fully closed
position (for Push-to-Open installation)
, place the opener with the Post
Bracket Assy. and Gate Bracket on the gate post and the gate. While
holding the gate opener in the level position, temporarily secure it with two
C-clamps.
Содержание A3132
Страница 6: ...3 A3132 Parts List...
Страница 7: ...4 A5132 A8132 Parts List...
