Topens A3132, Руководство пользователя

Страница: 25 / 35

22
Connection of the Control Board
1. Actuator 1 (Master gate, open first & close last)
Insert the stripped cable wires into the appropriate terminals on the opener terminals block. The red wire should
be inserted into the
―+MOTOR1‖
terminal(#15), the black wire into
―MOTOR1-‖
terminal (#16), the blue wire
into
―ULMT1‖
terminal(#17), the green wire into
―COM‖
terminal(#18), and the yellow wire into
―DLMT1‖
terminal (#19).
2. Actuator 2 (Slave gate, close first & open last)
The red wire should be inserted into the
―+MOTOR2‖
terminal(#20), the black wire into
―MOTOR2-‖
terminal
(#21), the blue wire into
―ULMT2‖
terminal(#22), the green wire into
―COM‖
terminal(#23), and the yellow
wire into
―DLMT2‖
terminal (#24).