Topcon Motorgrader, Руководство оператора

Страница: 87 / 172

Laser Receiver Setup
P/N 7010-0344
4-17
2. Setting the reference number to 0.00:
This is typically used for jobs with slope although it can be used
on flat pads as well. If the cutting edge is .15 feet above finish
grade, then set the display to read .15 feet. The operator can then
dial in a desired height above grade while roughing in, then dial
down to 0.00 for finish grade.
Push the "SET" button, turn the knob to read 0.15 feet, the push
"ENTER".
Figure 4-25.
System System
Five Five
System
Five
A uto A uto
CONTROL MODE
Gains
+
/
—
MENU
0.0% 0.0 F
T
+
2.0%
CONTROL MODE
GAINS
+
/
—
MENU
2.0%
CONTROL MODE
GAINS
+
/
—
MENU
0.15
F
T
CONTROL MODE
ENTER ZERO EXIT
0.0%