Topcon Motorgrader, Руководство оператора

Страница: 36 / 172

Operation
Motorgrader System Five Operator’s Manual
2-14
raise the moldboard and the inside button will lower the
moldboard. They perform the same function as the Grade
Adjustment Knobs located on the face of the Control Box, and
allow the operator's hands to never leave the blade levers.
• Survey
Survey is used to quickly lock on grade. The Sonic Sensor will
lock on the stringline, curb, or any other physical reference. The
Laser Trackerjack will search up and down and lock on the laser
beam. The Slope Control System will lock on to and display the
slope the moldboard is setting on.
To activate Survey Mode, hold both the Raise and Lower Buttons
for one second until a double beep is heard.
The Slope Control System can also be set to Indicate Mode. In
this mode, the operator manually cuts grade, and the Control Box
continuously displays the % slope he is cutting. It also shows the
readings of the Blade Slope Sensor, Mainfall Sensor, and
Rotation Sensor. This screen enables the operator to quickly
check that all the sensors are functioning.
To activate the Slope Indicate Mode, first switch Slope Control to
Manual. Then, hold both the Raise and Lower Smart Knob
buttons for three seconds until a second double beep is heard. To
switch back out of Indicate Mode, push either the Raise or Lower
button, or just switch to Automatic Control.
• Auto/Manual
Allows operator to switch the blade between Automatic and
Manual. Push the switch outward for Automatic Control. If both
sides of the motorgrader are in slope mode then only one "Auto"
indicator LED will illuminate consistantly when System Five is
switched to Automatic Operation. The other LED will flash; this
indicates that side is NOT in Auto Mode. Do not leave switch in
Automatic when not in use.2
• Swap (Left Knob Only)
Swap performs two functions at once, it reverses the sensor
functions being used from one side of the machine to the other.
– Slope Sensor: the direction of fall is reversed.