manualshive.com logo in svg

Topcon KR-1, Руководство пользователя, Страница: 74 / 76

Поделиться
Скачать
Topcon KR-1 Скачать руководство пользователя страница 74

72

3. THIS LICENSED PROGRAM IS PROVIDED BY THE LICENSOR “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTY AS 

TO THE LICENSED PROGRAM OR ANY DERIVED PROGRAM, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF TITLE, 
NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO EVENT 
SHALL THE LICENSOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXTENDED, EXEMPLARY, OR 
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO; PROCUREMENT OF SUBSTITUTED GOODS OR SERVICE; 
DAMAGES ARISING FROM SYSTEM FAILURE; LOSS OR CORRUPTION OF EXISTING DATA OR PROGRAM; LOST PROFITS), 
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE INSTALLATION, USE, THE REPRODUCTION 
OR OTHER EXPLOITATION OF THE LICENSED PROGRAM OR ANY DERIVED PROGRAM OR THE EXERCISE OF ANY 
RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

4. The Licensor is under no obligation to respond to any technical questions or inquiries, or provide any other user support in connection 

with the installation, use or the Reproduction and Other Exploitation of the Licensed Program or Derived Programs thereof. 

Article 4 (Termination of Agreement)

1. The term of this Agreement shall begin from the time of receipt of the Licensed Program by the Recipient and shall continue as long 

as the Recipient retains any such Licensed Program in any way. 

2. Notwithstanding the provision set forth in the preceding Paragraph, in the event of the breach of any of the provisions set forth in this 

Agreement by the Recipient, this Agreement shall automatically terminate without any notice. In the case of such termination, the 
Recipient may not use or conduct Reproduction and Other Exploitation of the Licensed Program or a Derived Program: provided that 
such termination shall not affect any rights of any other Recipient receiving the Licensed Program or the Derived Program from such 
Recipient who breached this Agreement. 

Article 5 (Governing Law)

1. IPA may publish revised and/or new versions of this License. In such an event, the Recipient may select either this Agreement or any 

subsequent version of the Agreement in using, conducting the Reproduction and Other Exploitation of, or Redistributing the Licensed 
Program or a Derived Program. Other matters not specified above shall be subject to the Copyright Law of Japan and other related 
laws and regulations of Japan. 

2. This Agreement shall be construed under the laws of Japan.

Содержание KR-1













































































Отзывы:

Нет отзывов