manualshive.com logo in svg

Topcon KR-1, Руководство пользователя, Страница: 60 / 76

Поделиться
Скачать
Topcon KR-1 Скачать руководство пользователя страница 60

58

SPECIFICATIONS AND PERFORMANCE

ELECTROMAGNETIC COMPATIBILITY

The product conforms to the EMC standard (IEC 60601-1-2 Ed3.0:2007)

a)MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC and

needs to be installed and put into service according to the EMC information provided in the
ACCOMPANYING DOCUMENTS.

b)Portable and mobile RF communications equipment can affect MEDICAL ELECTRICAL

EQUIPMENT.

c)The use of ACCESSORIES, transducers and cables other than those specified, with the

exception of transducers and cables sold by the manufacturer of the EQUIPMENT or SYS-
TEM as replacement parts for internal components, may result in increased EMISSIONS or
decreased IMMUNITY of the EQUIPMENT or SYSTEM.

d)The EQUIPMENT or SYSTEM should not be used adjacent to or stacked with other equip-

ment. If adjacent or stacked use is necessary, the EQUIPMENT or SYSTEM should be
observed to verify normal operation in the configuration in which it will be used.

e)The use of the ACCESSORY, transducer or cable with EQUIPMENT and SYSTEMS other

than those specified may result in increased EMISSION or decreased IMMUNITY of the
EQUIPMENT or SYSTEM.

Guidance and manufacturer's declaration - electromagnetic emissions

The KR-1 is intended for use in the electromagnetic environment specified below.
The customer or the user of the KR-1 should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment - guidance

RF emissions
CISPR 11

Group 1

The KR-1 uses RF energy only for its internal 
function. Therefore, its RF emissions are very low 
and are not likely to cause any interference in 
nearby electronic equipment.

RF emissions
CISPR 11

Class B

The KR-1 is suitable for use in all establishments 
other than domestic and those directly connected 
to the public low-voltage power supply network 
that supplies buildings used for domestic pur-
poses.

Harmonic emissions
IEC61000-3-2

Complies

Voltage fluctuations/
flicker emissions
IEC61000-3-3

Complies

Содержание KR-1













































































Отзывы:

Нет отзывов