Topcon KR-1 Скачать руководство пользователя страница 35

Страница: 35 / 76

BASIC OPERATIONS

When the alignment dot becomes smaller in size and "Alignment OK" is displayed, tap the

button.

Measurement is performed and measurement values are displayed on the control panel.

DISPLAYING MEASUREMENT VALUES

Data of the latest measurement are displayed on the control panel screen.

Figures only: Measurement was done correctly.
ERROR:

Measurement was not done correctly.

Even if fine alignment has not been achieved, measurement can be performed by

tapping the

button. To ensure correct measurement, try to get fine align-

ment.

Measurements can be performed off center if necessary by tapping the

button after placing the measuring head in the desired off center position.

After finishing the measurement, auto alignment is performed if the patient's eye
position is moved right/left and up/down.

NOTE:

If the machine is moved before measurement values are displayed, it
may cause incorrect measurement result.

For explanation of messages on the control panel screen, refer to “MESSAGE
LIST” on page 54.

START

R/K

LOW

FOG

13.75

-1.

-1.25

-0.

-0.50

7.80

7.75

180

PR2

0000100001000

PR1

3/3

MANUAL

7.80

0/3

3/3

0/3

PR1

PR2

PA1

Содержание KR-1













































































Результаты поиска

Содержание KR-1

Отзывы:

Topcon KR-1, Руководство пользователя, Страница: 35 / 76

Результаты поиска

Содержание KR-1

Отзывы: