Topcon KR-1 Скачать руководство пользователя страница 15

Страница: 15 / 76

COMPONENTS

Reset button ............................ Returns the chinrest and measuring head to the initial

position.

Forward/backward button for measuring head

............. Moves the measuring head closer to/away from the

patient's eye.

Start button............................... Starts measurement .

Auto/Manual button.................. Selects Auto/Manual mode (A: Auto mode, M: Manual

mode). The name of selected (Auto/Manual) is dis-
played on the control panel.

Settings button ....................... Displays the Settings screen.

FUNCTION BUTTON

Cataract button............... If error messages occur in patient's with cataracts, push the

Cataract button may improve measurements. When the button
is selected, "CAT" is displayed on the monitor and the selected
button is framed in orange.

Fixation target button ..... Brightness of the fixation target can be changed.

FOG button .................... Changes setting temporarily to perform fogging only in the first

measurement or each time in the continuous measurement.

Target image button ....... The captured measurement target can be observed on the

control panel.

Print out button .............. Prints measurement results. Tap the button when no measure-

ment data is present to feed the paper.
By setting the printer mode to Graphic Printer on the Settings
screen, figures showing refractive conditions can be printed. In

this case, the printer button changes to

Cornea diameter button .. Changes to cornea diameter measurement mode.

ALL CLEAR button......... Clears all measurement data.

Cataract button

ALL CLEAR button

Cornea diameter button

Fixation target button

Print out button

Target image button

FOG button

Содержание KR-1













































































Результаты поиска

Содержание KR-1

Отзывы:

Topcon KR-1, Руководство пользователя, Страница: 15 / 76

Результаты поиска

Содержание KR-1

Отзывы: