Top Notch Products MINI SUPREME, Руководство пользователя

Страница: 30 / 38

28
c
4
c
3
c
2
c
1
FINAL ASSEMBLY
Using Top Notch Servo Mounts
Top Notch servo mounts provide a simple and effective means of side mounting your servos securly
to a servo plate, fuselage side or any where you have a fl at surface on which to locate a servo. Top
Notch servo mounts come in two sizes to cover all types of servos.
WING SERVO MOUNT ASSEMBLY
Example of a wing servo mount us-
ing the Top Notch servo mounts.
Example of mounted servo in Top Notch
servo mount.
Use some 1/32” balsa or other material as a spacer under and on both sides of your servo. You
do not want the servo to make mechanical contact with the mounting surfaces. All support of
the servo should be provided through the rubber vibration absorbing grommets supplied with
the servo.
Place the servo on the surface it will be mounted to with a 1/32” spacer underneath. Place a
Top Notch servo mount at each end of the servo again with a 1/32” spacer between the servo
and the servo mount. When the servo is correctly positioned, tack glue the servo mounts in
position. Remove the servo and all spacer materials and permanently glue the mounts in place.
Now place the servo and spacers back in position and mark and drill the screw holes for your
servo
Remove the servo and spacer materials and wick thin CA into the servo mount until it will no
longer accept it. Let this cure before fi nal installation of the servo.
After wicking CA into the mount you should re-drill the screw holes to clean them out.