Top Notch Products MINI SUPREME, Руководство пользователя

Страница: 24 / 38

22
c
7
c
6
c
5
Use Epoxy to join the elevator halves. Use
a tooth pick to get Epoxy into the hole and
along the bottom of the trough.
When cured, plane a 20 degree cham-
fer into the leading edge top and bottom.
Round over all remaining edges.
Temporarily tape the elevator to the stabi-
lizer and mark the hinge locations on both.
Then cut the hinge slots and preassemble
the stabilizer with the elevator. Final as-
sembly will be done after covering and in-
stalling onto the fuselage.
c
5
c
4
c
3
c
2
c
1
c
5
c
4
c
3
c
1
c
2
VERTICAL FIN ASSEMBLY
Place the vertical Fin plan on the bench
and cover with waxed paper. Position V3
over the plans and secure with pins.
Glue V2 to V3.
Glue V1 to V2 and V3.
Install and glue V4 and V5.
Mark the location of the hinges and cut the
hinge slots.
All laser cut parts makes for quick assembly of the empen -
nage components.
RUDDER ASSEMBLY
Place the rudder plans on the bench and
cover with waxed paper. Place R1 over the
plans and secure with pins.
Glue R4 to R1.
Glue R2 to R1.
Install and glue R5, R6 and R7.
Mark the hinge location and cut the hinge
slots.