Top Gun 351 SWF, Руководство пользователя

Страница: 17 / 32

15
60 Amps 15V -17V 3 -4 3 -4 2 -4 - -
80 Amps 15V -18V 4 -5 3 -5 3 -5 2 -4 -
120 Amps 16V -20V 6 -7 5 -8 4 -7 3 -4 2 -6
160 Amps 17V -21V 10 -12 7 -12 6 -12 4 -9 3 -6
200 Amps 17V -26V - 11-12 9 -15 6 -11 3 -5
250 Amps 17V -28V - - - 8 -15 4 -6
300 Amps 24V -32V - - - 11-12 6 -7
350 Amps 26V -29V - - - 9 -14 7 -8
400 Amps 28V -31V - - - - 9 -10
450 Amps 30V -34V - - - - 10 -12
500Amps 33V -35V - - - - 12 -14
0.8mm 0.9mm 1.0mm 1.2mm 1.6mm
Welding
Current (Amps)
Welding Volts
(Volts)
Wire Speed
MACHINE SETUP.
1. CONNECT INPUT LEAD TO POWER SOCKET.
2. CONNECT INTERCONNECTING LEADS FROM WIRE FEEDER TO POWER SOURCE.(POSITIVE TO POSITIVE ETC.)
3. CONNECT EARTH LEAD TO POWER SOURCE (AS REQ OR -) AND ATTACH TO WORKPIECE OR WORK BENCH
4. CONNECT GAS LINE FROM MACHINE TO REGULATOR AND IF USING CO2 CHECK THAT HEATER IS OPERATIONAL.
5. CONNECT TORCH TO WIRE FEED UNIT BY THE EURO CONNECTION AND TIGHTEN FIRMLY BUT DO NOT OVER TIGHTEN
(HAND TIGHT)
6. INSTALL WIRE TO WIRE-FEED UNIT AND CHECK CORRECT ROLLERS INSTALLED
7. CHECK AREA FOR HAZARDS.
8. TURN MAINS POWER ON.
9. TURN WELDING MACHINE ON.
10. SETUP MACHINE SUITABLE FOR APPLICATION.
PLEASE NOTE: OPERATING INSTRUCTIONS ARE ON PAGE