Top Flite GIANT SCALE GOLD EDITION ZERO, Инструкция по эксплуатации

Страница: 30 / 40

30
❏
11. Install the foam under the receiver and the receiver
battery and place them onto the tray as shown. Cut the
included hook and loop material to the proper length
and secure the battery and receiver with the hook and
loop straps. Connect the servos to the receiver and
route your receiver antenna following the instructions
with the radio system.
INSTALL THE COCKPIT,
PILOT AND CANOPY
We have provided a cockpit interior that, on its own,
gives a very realistic look to the interior of the aircraft.
With a little time and creative use of additional materials
you can make a very detailed interior. Look through the
following instructions to gain a better understanding of
how the cockpit goes together. The installation shown
here is for the basic cockpit interior. If you are going
to add additional detail you may wish to make those
additions before you assemble the interior. Added details
can be created more easily when the cockpit is not
installed into the aircraft.
❏
1. Locate the cockpit fl oor and spacer sticks. Cut
the sticks as needed to fi t the cockpit and glue them
in place as shown. These sticks are simply spacers to
raise the cockpit fl oor to allow clearance for the hook
and loop straps holding the battery and receiver. Once
the cockpit fl oor is installed it will be diffi cult to feed the
straps back in place should they ever become dislodged
from the slots. You may wish to apply a few drops of
glue to the straps to prevent this.
❏
2. Glue the two halves of the cockpit fl oor to the
sticks you installed.
❏
3. Locate all of the parts of the cockpit.