-
Accessories such as Wired Siren & Strobe Unit, Wireless Signal Extenders,
Wireless Doorbells, Shock Sensors and more may be available
NOTE: An unlimited amount of sensors/detectors can be used with the WIRELESS
ALARM SYSTEM. This allows you to expand and customize your security system as
needed.
PLANNING YOUR INSTALLATION
Before proceeding with any part of the installation you must give very careful consideration to the
location of detectors, the control panel and external siren unit. It would prove extremely useful if you
sketch a plan of your property and identify the optimum location of each component of the system.
The starter kit is designed to suit the smallest property and provide a significant improvement in
protection. The use of additional detectors is strongly recommended in larger buildings, for example
a home consisting of 4 rooms on the lower floor and 4 rooms on the upper floor should use at least
4 PIR Motion Detectors and 3 Door/Window sensors. It is possible to add any number of detectors
to each zone.
Detectors/sensors set to Zone 2 & Zone 3 will not activate the system when set into Partial
Arming (At-Home) Mode.
As an example - this is ideal for use in Bedrooms and a Hallway so
that the system may be entered into Home Mode during the night thus allowing the occupants
access to the upper rooms only.
NOTE:
It’s very import to install the alarm panel in the center of a house and ensure all the
detectors are positioned within the circled areas for optimum performance.
The picture below is a plan showing this type of dwelling and how best to position the detectors. The
Control Panel is positioned at a center point between detectors for optimum reception performance.
EASY DO-IT-YOURSELF INSTALLATION
Setup and installation of the WIRELESS ALARM SYSTEM is practically effortless, because all
of the sensors and detectors are wireless. If you follow the instructions carefully, you should
have no problem setting up and installing this system, and adding additional and optional
accessories as needed.
Please keep in mind that the factory default settings are specifically set up to simplify
the installation and programming.
Although there are advanced setup and programming
