IMPORTANT – PLEASE READ THIS SECTION FIRST
This is a Do-It-Yourself WIRELESS ALARM SYSTEM designed to help users protect themselves,
their loved ones and their property and personal possessions. Please read through the important
information below before getting started with the WIRELESS ALARM SYSTEM.
•
Carefully follow the instructions in this manual when installing, setting up and programming
the WIRELESS ALARM SYSTEM
•
Take special notice of any specified notes, or bullet points throughout this manual
•
Please take the following precautionary measures while handling and installing the
WIRELESS ALARM SYSTEM:
1.
Keep the WIRELESS ALARM SYSTEM away from water or damp areas
2.
Do not install the WIRELESS ALARM SYSTEM in direct sunlight or near
extreme heat
3.
Do not install the WIRELESS ALARM SYSTEM near strong electrical
current or magnetic force
4.
Avoid dropping the WIRELESS ALARM SYSTEM or placing it in an area
with strong vibration
5.
Do not disassemble the product – Doing so will void the Warranty
6.
Use only the provided Power Adaptor from
supplier
7.
The rechargeable backup battery MUST use 3 pieces of AA size 1.2volt /
1300mA Ni-Mh rechargeable batteries.
8.
To maintain the WIRELESS ALARM SYSTEM and its optimal performance,
users should test the entire system every one to two weeks
•
The WIRELESS ALARM SYSTEM is considered a “Local Alarm” in most states and regions,
which may qualify for certain discounts on homeowner’s insurance. Please ask your insurance
company or authorized insurance agent for more details.
NOTE: The Manufacturer shall have no liability for any death, personal and/or bodily injury
and/or damage to property or other loss, whether direct, indirect, incidental, consequential
or otherwise, based on a claim that the Product failed to function.
FEATURES, FUNCTIONS & BENEFITS
Do-It-Yourself Wireless
System
•
No hard-wired installation necessary
•
Practically effortless screw-in or double-sided tape mounting
•
Up to 300 ft. range covers entire house, apartment, small
business, etc.
Easy Setup & Operation
•
Simple programming & operation
•
Very user-friendly features & functions
•
All setup & programming options are passcode-protected
Pocket Remote Control
•
Allows easy arming, disarming & emergency calls
directly from pocket-sized remote control
“Remote Control Disarm
Disable” Function
•
Disarm is only possible via the control panel keypad
code when switched to ON
“Away” & “At-Home”
Security Modes
•
Various programming & arming options for “Away” or
“At-Home” security
Entry/Exit Delay time
Countdown Warning
Tone
•
A warning tone is given upon “Arming” reminding you of
imminent siren activation if the premise is not vacated
during the exit period.
•
During initial entry to the premise you are also reminded to
disarm the control panel with an identical warning tone.
Entry/Exit Zone (Zone 1)
•
Allows users time to exit or enter alarmed zone
•
Countdown beeps alert users before arming
“Walk Through” Feature
(Zone 2)
•
Allows users to active Zone 2 without setting alarm off if
Zone 1 is active first, Useful to user can reach Control Panel
to deactivate alarm if Panel is not located directly next to
entrance area. Zone 2 to 5 will activate the system instantly
except Zone 2 if Zone 1 is activated first.
Built-in Loud Siren
•
Immediately deters intruders
•
Alerts users, neighbors & others of an alarm activation
Auto Dialer for alarm
notification
•
Automatically calls up to six specified phone numbers
upon alarm activation & plays pre-recorded Alarm
Notification Message
