8
Assembling the Overhead Beater cont
’
d
The beater will sit in the beater mounts, which
are on the front uprights and look like a ridged
block. After the shafts have been hung, you can
lift the beater up and drop it into the beater
mount. Experiment with which position in the
ridges is best for your arm length and shed size.
Mounting the control box on the rails
This is best with 2 people as you will need to balance the box on
the rails while attaching it. Start by placing the 2 rails on a flat
surface and hold them steady while placing the box carefully on
top. The front rail and the front of the box have the Toika logo
on them.
Remove the lid by loosening the 2 screws at each end of the box. The screws will stay affixed to the lid. Lift
the lid and set aside
Line up the holes in the 4 corners of the box with the holes in the rails. Screw firmly in place.
