9
n
D
IG
IT
A
L
T
O
R
Q
U
E
S
C
R
E
W
D
R
IV
E
R
T
E
S
T
E
R
M
O
D
E
L
T
D
T
3
-G
(8) Statistical processing key (STAT key)
Use this key to select samples, maximum value, minimum value or average value.
(9) Mode Key (MD key)
Push this key to select RUN mode or PEAK mode.
Keep pushing this key for 2 seconds or more, then it turns to uper/lower limit value selection.
(10) MEMORY/RESET switch
After giving judgement to the measured data, it moves the counter forward by one.
4-2. Power Source and Output
USB terminal
RS232C terminal
Power jack
Power switch
(1) Power jack (12V, 1A, center plus)
Use the included AC adapter (BA-6).
(2) Power switch
Turn power ON and OFF.
(3) RS232C terminal
Use RS232C communication cable to connect.
(4) USB terminal (B type), serial terminal
Connect USB communication cable.
* RS232C terminal and USB terminal should not be connected to external device at the same time.
