Tohnichi CTA2-G Скачать руководство пользователя страница 4

Страница: 4 / 56

(8)

Do maintenance work carefully.

For part replacement, refer to the instruction manual.

Doing otherwise may cause injuries.

Conduct periodic check on the cord of the charger, and request repair or
replacement to the authorized distributor or Tohnichi if damaged.

If you keep using the damaged cord, it may cause electric shock, or fire.

If you intend to use an extension cord, conduct the periodic check and replace it

if damaged.

Otherwise, it may causes short-circuit or fire.

Keep the handle part of the wrench clean and dry. Protect it from oil or grease.

Otherwise, it may cause the handle to slip and lead to injuries.

(9)

Conduct periodic checking to detect damaged part.

If you find any damaged part such as the plug or cord, request repair or

replacement to the authorized distributor or Tohnichi.

If you keep using the damaged ones, it may cause short-circuit or fire.

Содержание CTA2-G

























































Результаты поиска

Содержание CTA2-G

Отзывы:

Бренды по названию

Популярные бренды

Tohnichi CTA2-G, Инструкция по эксплуатации

Результаты поиска

Содержание CTA2-G

Отзывы:

Бренды по названию

Популярные бренды