25
ENGINE START
Starting engine using the manual starter
When you use the manual starter, operate the engine as shown below.
*If electric starter does not work, use the manual starter.
1. Set the fuel cock to the “OPEN” position, this will allow fuel to flow to
the carburetor.
2. Set the throttle dial to the “SUCTION START” position.
3. Set the main switch to the “ON” position.
4. Engage the starter ratchet by pulling the starter handle
slowly towards you. When you feel the ratchet engage,
pull the handle sharply (holding the fire pump in place
with your foot).
5. After engine starts, return the starter handle to the original
position slowly. Do not let the starter handle go off, this
can cause damage to the recoil of the starter.
Do not pull the manual starter handle
when the pump is running. Otherwise,
the manual starter may be damaged.
When you start the engine using the
manual starter, pull the starter handle in a
breath when you feel the handle heavier.
7
ON
SUCTION
START
OPEN
１
１
２
２
３
３
４
４
５
５
６
６
７
７
８
８
９
９
10
10
11
11
12
12
13
14
15
16
17
18
13
14
15
16
17
18
