Service
Maintenance
Servicing and maintenance of this fire pump must be carried out by
only persons who have professional knowledge, who are familiar with
the device and who understand laws and regulations regarding safety
and accident prevention.
Before starting maintenance work, turn the main switch off to stop the
engine.
Disconnect the negative terminal of the battery.
Before starting maintenance work, securely place the portable fire pump on the ground.
Do not touch the exhaust pipe, the muffler and the other engine parts until these parts
will be cold enough. These parts could be very hot and will cause severe burns.
Safety devices
After protection devices (such as muffler guard) have been
disassembled as part of servicing and maintenance work,
immediately install them back to their original locations,
making sure that they are in safe secure condition.
Check the portable fire pump visually and functionally on a
regular basis.
If you find any faulty device or equipment, remove it
immediately, and repair or replace it, if necessary.
Failure to do so may cause an accident.
After it has been repaired or replaced, make sure that it
functions correctly.
