Toa VX-3308WM Скачать руководство пользователя страница 75

Страница: 75 / 89

Chapter 3

OPERATION

[Operation example 4 (Example of disablement of EMG control from CIN: Basic operation)]

You can stop the emergency activation from the control input when the system is in general mode.

This function is intended not to activate the emergency broadcast by the fire alarm system during maintenance.

Note

This function is enabled only when the system is in general mode. Even if you press the key to which this

function is assigned while the system is in emergency mode, a beep tone will sound, making the operation

invalid.

Step 1.

Press the "Disablement of EMG control from CIN" key

while the system is in general mode.

The key ON/OFF indicator lights green and the status

indicator of "disablement of EMG control from CIN"

function lights red.

In this condition, the emergency activation becomes

invalid even if the emergency broadcast pattern is

activated by way of the control input.

Step 2.

Press the "Disablement of EMG control from CIN" key

again.

The key ON/OFF indicator and the status indicator of

"disablement of EMG control from CIN" function go off.

Red Green

Status indicator of "disablement

of EMG control from CIN" function
Key ON/OFF indicator

"Disablement of EMG

Control from CIN" key

"Disablement of EMG

Control from CIN" key

[Operation example 5 (Example of disablement of EMG control from CIN: Operation when the function

is turned ON by other remote microphone)]

When the "Disablement of EMG control from CIN" key is assigned

to 2 or more remote microphones’ function keys, the buzzer will

sound and the status indicator of "disablement of EMG control

from CIN" function will flash red if this function is turned ON by

other remote microphone.

Status indicator of "disablement

of EMG control from CIN" function
Key ON/OFF indicator

"Disablement of EMG

Control from CIN" key

Step 1.

Press the "Disablement of EMG control from CIN" key

when the buzzer sounds.

The status indicator of "disablement of EMG controlfrom

CIN" function lights red.

Flashes red

Red

"Disablement of EMG

Control from CIN" key

Step 2.

Press the "Disablement of EMG control from CIN" key

again.

The key ON/OFF indicator lights green.

The status indicator of "disablement of EMG controlfrom

CIN" function remains lit red as long as this function is

kept ON by other remote microphone.

The status indicator of "disablement of EMG controlfrom

CIN" function goes off when the function is turned OFF

by all the remote microphones to which this function is

assigned.

Red Green

"Disablement of EMG

Control from CIN" key

Note

The emergency activation from the control input is kept invalid unless this function is turned OFF by all the

remote microphones to which this function is assigned.

Содержание VX-3308WM


























































































Результаты поиска

Содержание VX-3308WM

Отзывы:

Бренды по названию

Популярные бренды

Toa VX-3308WM, Руководство по эксплуатации

Результаты поиска

Содержание VX-3308WM

Отзывы:

Бренды по названию

Популярные бренды