Toa VX-3308WM Скачать руководство пользователя страница 72

Страница: 72 / 89

Chapter 3

OPERATION

[Operation example 1]

Described below are the steps of system operation from emergency mode activation to restoration.

Step 1.

Press the Emergency key (1).

• Emergency mode is activated and the Emergency key

lights red.

• The pre-configured emergency sequence pattern is

recalled, and the Alert Message is broadcast to all zones.

• The Zone monitor indicator of the All-Zone Call key (4)

indicates the type of message currently being broadcast.

It flashes red to indicate that an alert message is currently

being broadcast.

Emergency key

Zone monitor indicator
Selection indicator

All-Zone Call key

Flashes red

• The Phase state indicator of the Emergency Sequence

Phase Shift key (2) lights green when the emergency

sequence phase 1 is broadcast.

Phase state indicator
Key ON/OFF indicator

Phase Shift key

Green

Step 2.

Press the Emergency Phase Shift key (2) to broadcast the

Evacuation message, if necessary. The Evacuation

message will be broadcast to all zones. In this event, the

broadcast pattern shifts from the emergency sequence

phase 1 to the phase 2, and the Phase state indicator

flashes green.

The Zone monitor indicator of the All-Zone Call key (4)

indicates the type of message currently being broadcast.

It changes from flashing red to steady red status to indicate

that the evacuation message is being broadcast.

The Emergency Sequence function automatically switches

the current message to the Evacuation message after a 5-

minute interval if nothing is done.

Flashes green

Red

Phase state indicator
Key ON/OFF indicator

Phase Shift key

Green

Zone monitor indicator
Selection indicator

All-Zone Call key

Green

Содержание VX-3308WM


























































































Результаты поиска

Содержание VX-3308WM

Отзывы:

Бренды по названию

Популярные бренды

Toa VX-3308WM, Руководство по эксплуатации

Результаты поиска

Содержание VX-3308WM

Отзывы:

Бренды по названию

Популярные бренды