Toa VX-3308WM Скачать руководство пользователя страница 32

Страница: 32 / 89

Chapter 2

INDICATOR STATUS OF REMOTE MICROPHONES

1.19. Indicator State at the Time of Disablement of EMG Control from CIN

When the system is set to "Emergency," the "disablement of EMG control from CIN" function can be assigned

to the function key.

When this function is assigned to the function key, you can stop the emergency activation from the control input

when the system is in general mode.

This function is intended not to activate the emergency broadcast by the fire alarm system during maintenance.

When this function is assigned to 2 or more remote microphones, it can be made invalid only by performing

cancellation operation at all these remote microphones.

When this function is assigned to the function key, the 2 indicators next to the key indicate the key selection

status, enable/disable status of the function, and acknowledge status.

This function is enabled only when the system is in general mode. Even if you press the key to which this

function is assigned while the system is in emergency mode, a beep tone will sound, making the operation

invalid.

Notes

• For the emergency function settings, see the separate Setting Software Instructions, "BASIC SETTINGS."

• For instructions on assigning functions to the function key, see the separate Setting Software Instructions,

"EVENT SETTINGS."

Status indicator of "disablement of

EMG control from CIN" function

Key ON/OFF Indicator

Function key

("Disablement of EMG Control from CIN" key)

Indicator meanings are as follows:

Indicator

Status

Meaning

Key ON/OFF Indicator

Unlit

When the function key is not pressed

Lights green

When the function key is pressed

Status indicator of

"disablement of EMG

control from CIN" function

Unlit

When the disablement function of emergency activation from

the control input is set to OFF

Flashes red

When the disablement function of emergency activation from

the control input is turned ON by other remote microphone

Lights red

When the disablement function of emergency activation from

the control input is turned ON by this remote microphone

or when the status that this function is turned ON by other

remote microphone is acknowledged

Содержание VX-3308WM


























































































Результаты поиска

Содержание VX-3308WM

Отзывы:

Бренды по названию

Популярные бренды

Toa VX-3308WM, Руководство по эксплуатации

Результаты поиска

Содержание VX-3308WM

Отзывы:

Бренды по названию

Популярные бренды