Toa TTT-710, Инструкция по эксплуатации

Страница: 74 / 118

Model: TTT-710 6.2 Various Conditions Setting
- 73 -
(Continued from previous page)
Operation Screen example
④ Detail conditions setting
⋅⋅⋅
Set the washing mode detail
conditions as follows:
: Move the cursor position (blinking)
: If cursor is on a washing order, the cursor position
of the washing order is switched.
If the cursor is over the washing item (the head of
the washing item) the type of washing item is
switched.
If the cursor is over the washing time/ over the air
blow number of times (the value of the last digit)
the value is increased or decreased.
•
If you want to end washing order at 4 th within the next
washing order select the "Wash End" in the washing item
incidentally.
ENTER : Enters the set value.
•
After setting, the display returns to the Electrode Washing
Selection screen.
Washing Detail Condition
Setting screen
⑤ End the setting.
⋅⋅⋅
Press WASH .
•
The display returns to the Measurement Waiting screen.