Toa EXES-6000, Эксплуатация и устранение неисправностей

Страница: 41 / 60

The data transmitting unit (DT) converts the
data received from the CP unit in the ex-
change, and transmits the converted data to
the data receiving unit (DR). After receiving the
data, the DR will control 32 relays contained in
it. The DR-B61 is a printed circuit board
assembly, and users need to provide desired
indicators or controllers by using it.
1. Function Setup (DIP switch setting)
1-1. DIP Switch Setting for the Data Transmitting Unit DT-E60, ET-E11G or
DT-E11
A maximum of 16 data transmitting units can
be connected in parallel per exchange. It is
possible to determine the channel number of
the unit by setting the DIP switch on the PC
board inside the unit. See Fig. 40.
The function that corresponds with the channel
number varies according to the CP unit to be
used. So, refer to Tables 1 through 4 when
selecting the desired function with the DIP
switch.
Fig. 40 Data Transmitting Unit
Note. The number of channels available from
each type of CP unit:
CP-60 (EX-600)
CP-62 (EX-610/620)
CP-63 (EX-610/620 tie-line)
CP-64 (EX-630)
CH. 0 ~ CH. 1
In any case, a maximum number of the DT
units that can be used is 16, and the channel
number of each DT unit is freely selectable. (It
is possible to use all the 16 DT units for
Channel No. 1.)
— 41 —