Toa EXES-6000, Эксплуатация и устранение неисправностей

Страница: 40 / 60

By using the Data Transmitting Unit (DT-E60,
DT-E11G or DT-E11) and Data Receiving Unit
(DR-B61) in the EXES-6000 System, the ON/
OFF operation of various indicators and the
controls of other equipment are possible from
any master station. This is an optional function.
Fig. 39 shows the applications.
Note. Refer to Installation Manual of each CP
unit for functions of these units.
In/Out annunciation panel
Personal in and out registration
that is indicated by a lamp can
be accomplished by using per-
sonal numbers. (Up to 500
persons)
Destination indicator panel
When a person registers his
personal number at the station,
the station number at which
the registration was made can
be indicated by the lamp. (A
maximum of 32 destinations
and persons can be indicated.)
Calling party indicator panel
(numerical type)
The indicator panel is to be set
up at the called station Calling
station numbers are indicated
numerically in the panel includ-
ing one which makes a call
while the called station is busy
or in privacy (a maximum of 8
waiting stations can be stored.)
The panel can also indicate the
number of waiting stations.
(Up to 32 specified stations can
have the panel)
Calling party indicator panel
(lamp type)
When the called station having
the indicator panel receives a
call, the calling station number
is indicated by the lamp until
the conversation is over or
when the called station is busy
or in privacy. (A maximum of 8
stations or groups can have the
panel.)
Pager control
It is possible to call a pager
holder from any master station.
The called person can respond
to the call from the nearest
master station (The pager sys-
tem should provide input capa-
bility to interface with Toa data
receiving unit.)
Prescription display board
(lamp type)
The prescription number ready
for delivery is indicated by the
lamp.
Prescription display board
(numerical type)
Prescription numbers ready for
delivery are numerically indi-
cated.
Room condition indicator
panel
Whether a room is occupied or
not is indicated by the lamp
CCTV camera remote
CCTV cameras can be oper-
ated remotely.
VTR remote
VTRs can be operated re-
motely.
Door remote
Notes
(3) Connect between the Data Transmitting Unit DT-E60 and the Data Receiving Unit
Fig. 39 Applications of Data Transmitting and Receiving System
— 40 —
VII. DATA TRANSMITTING AND RECEIVING SYSTEM
(1) Each indicator panel needs to be made by using the Data Receiving Unit DR-B61.
(2) An interface with the DR-B61 built inside is necessary for each remote operation.
DR-B61 with 2 non-polar wires.