W W W . T M G I N D U S T R I A L . C O M
P 1 6 / 3 7
T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
4.2.4 Air inflation
Note: the pneumatic operation of the tire must be very carefully, strictly according to
the following instructions for operation, if the tire suddenly burst,
the design and structure of semi-auto tire changer is not able to protect the
operator's personal safety (or anything in the vicinity of the machine. In the process
of charging, as far as possible, make hands and the body be far away from the tire),
recommend using professional inflatable tools (inflatable cage or other protective
device for the tire inflation).
The burst of the tire may cause severe damage to the operator or even death.
Before charging, check whether the tire was damaged.
Remove the tire from the turntable, if you need a greater inflation pressure, you can
place the tire into a special protective cage to continue to inflate it, use the
pneumatic gun provided by the tire changer to inflate, according to the following
steps to complete: first, connect the pneumatic nozzle to the tire valve (as shown in
Figure 13), second, confirm whether the tire diameter is consistent with the diameter
of the rim, third, release the trigger of the gas gun and control the pressure of the
pressure gauge in the process until the tire is fit to the rim, at last, continue to inflate,
and often check the inflation gauge pressure until the pressure reaches the specified
value of the tire. (Note: use the inflated gun to inflate the tire, regularly check the
pressure of the inflation gauge).
Figure 13
