TMEZON MZ-IP-V739W, Руководство по эксплуатации

Страница: 8 / 29

12 11
1.7 Operation Introduction On Indoor Monitor
VISITOR CALL
The Visitor press
the
call button on
outdoor camera 1
A 10s of continuous
ringtone is heard
inside and outside
The visitor’s image
automatically displayed on
the screen
release the
door lock
Standby mode
Press the unlock
button on indoor
monitor
Press the Hang up button
on indoor monitor again
End
The Visitor press
the
call button on
outdoor camera 2
If both call button on two outdoor camera are pressed at
approximate to the same time, the preference will be given to the
outdoor camera which call button was pressed first, unless the
call button is pressed again after the indoor monitor go into
standby mode, please be aware of that there is no indication on
second outdoor camera but third brief of tone will be heard on
indoor monitor.
NOTICE:
Both the visitor’s voice and image will be not switched off within 20s of time span
when the unlock button is pressed, this individualized function allow you to make
sure whether the visitor already come in .
Start conversation
with outdoor camera
Press the Talk
button
The indoor monitor will automatically go into standby mode if you are
not at home or have not reached the indoor monitor in 60s.
The conversation
duration is 120s
at a time
Stop ringing
NOTICE:
Please be aware of Connection of 2 outdoor cameras is required.
◆
Talk
For the models with SD card, if the SD card has been inserted into the indoor monitor,
when visitor press the Call button on outdoor camera, the device will start recording,
and the recording will continue to be a few seconds.
MONITORING On Indoor Monitor
Press the monitoring 1
button on indoor
monitor
Standby mode
Press the Talk
button
End
Press the monitoring 2
button on indoor
monitor
Display image from 2nd
outdoor camera on the
screen.
Press the Hang up
button
Monitoring duration
is up to 60s at a time
Press the unlock
button to release
the door lock
Display image from 1st
outdoor camera on the
screen.
Start conversation
with outdoor camera
Please be aware of Connection of 2 outdoor cameras to 1 indoor monitor is required for dual
entrance monitoring at least.
◆
Talk
Hang up
“RING 1” and “RING 2”, press this button to move the cursor, scroll this button to adjust values, scroll the button
upwards to increase, and scroll the button downwards to decrease. The values of the brightness, contrast and
color are all set at from 0 to 60. The total of ringtone is 16.
BRIGHTNESS 30
CONTRAST 30
COLOR 30
RING 1 01
RING 2 02