CLEANING THE NEBULIZER SYSTEM
To clean the nebulizer system, proceed as follows:
1. Go to the front of the machine and remove the cap (1) from the tank (
)
2. Remove the plastic chassis (2) of the machine (
).
The equipment needed for removing the bolts is not included with the machine.
3.
4. Repeat the operations in reverse order to reassemble all the parts.
5. For electrical versions, connect the plug (3) of the power cable to the mains supply socket (
).
CAUTION:
We recommend handling the power cable with dry hands to avoid serious injury.
Always unroll the power cord completely to prevent it from overheating.
6. Go to the rear of the machine and switch it on, turning the main switch (4) to position “I” (
).
7. Remove the spray gun from the holder.
8.
).
9. Start nebulizing the water by pressing the lever on the spray gun.
CAUTION:
During this phase and throughout the work, do not point the jet of the spray in the direction of your face or the people around
you.
Wait a few seconds for the sanitizing product to be circulated and nebulized.
10. Spray the water for at least a few minutes.
CAUTION:
When working, do not point the jet of the spray in the direction of your face or the people around you.
CAUTION:
When working, do not point the jet of the spray in the direction of electrical or electronic components.
DISPOSAL
Dispose of the machine in accordance with the waste disposal regulations in force in the country in which the machine
is being used.
21
