5
equal to that shown on the serial number plate.
• The power supply cable outlet must have an earth connection in compliance
with the regulatory standards.
• If the machine packaging contains the cable to connect to the mains supply, it
should only be used for the above-mentioned machine.
• Before using, check for any damage on the connection cable and on the power
plug. If the cable is damaged, immediately contact a technician for restoring
normal functioning.
• Connect the machine only to an electrical connection installed by an electrical
installer in conformity with IEC 60364-1.
• Never touch the power plug with wet hands.
• Make sure that the cable to the mains or the extension cable have not been
damaged by having been walked on, crushed, pulled or the like. Protect the
cable from heat and from contact with oils or sharp edges.
• Regularly check that the cable connecting to the mains is not damaged, for
example with signs of ageing or cracks. If the cable is damaged it should be
replaced before using the machine again.
• Protection against splashes of water and the mechanical strength need to
be ensured also after any replacement of the joints of the power cable or the
extension cable.
WARNING:
• To prevent unauthorized use of the machine, the power supply should be cut
from the mains socket.
ATTENTION:
•
the main switch and disconnect the power cable from the mains socket.
• The procedure causes a short-term reduction in voltage.
• In unfavourable grid conditions the other appliances could be damaged.
•
